* Vinyl top kit
* Heat gun
* Pry bar
* Utility knife
* Rags
* Solvent
* Adhesive
* Rivets
* Drill
Instructions:
1. Remove the old vinyl top. To do this, you will need to remove the trim pieces around the top, then pry the top off the frame with a pry bar. Be careful not to damage the frame.
2. Clean the frame. Remove all of the old adhesive and dirt from the frame. You can do this by using a solvent and a rag.
3. Apply adhesive to the frame. Apply a thin layer of adhesive to the frame. Be sure to cover the entire surface.
4. Position the new vinyl top. Carefully position the new vinyl top on the frame. Make sure that it is centered and that the edges are even.
5. Heat the vinyl top. Use a heat gun to heat the vinyl top until it is soft and pliable. This will make it easier to stretch it over the frame.
6. Stretch the vinyl top over the frame. Starting at the front of the top, stretch the vinyl top over the frame. Use your hands to smooth out any wrinkles.
7. Attach the trim pieces. Reattach the trim pieces to the top. You may need to use rivets or screws to secure the trim pieces.
Tips:
* Be sure to take your time when installing the new vinyl top. If you rush, you may make mistakes that will ruin the top.
* If you are not comfortable installing a vinyl top yourself, you can have it professionally installed.
