Materials needed:
• Flathead screwdriver
• Phillips head screwdriver or drill
Instructions:
Step 1: Open the rear gate of your VW Transporter T5
Step 2:Locate the two screws which hold the licence plate.
They are in recessed hexagonal bolts at the bottom end underneath the number plate
Step 3: Use a flathead screwdriver to pry loose the plastic covers which conceal the screw-heads
Step 4: Use a a Phillips head screwdriver (PZ2) to loosen and turn (anti-clockwise) both screws completely out from the plate
Step 5: Carefully pull upwards to unclip and free the licence plate bracket at the top
Step 6: Remove your car’s licence plate from the plastic housing by lifting upwards until fully released. (The bracket will probably still be clipped onto your Transporter).