The brake fluid reservoir is typically located on the handlebars of a motorcycle. It is a small, transparent container with a cap that is usually red or black. The brake fluid level should be checked regularly and topped off as needed.
To add brake fluid to a motorcycle, follow these steps:
1. Park the motorcycle on a level surface.
2. Turn off the engine.
3. Locate the brake fluid reservoir.
4. Remove the cap from the reservoir.
5. Add brake fluid to the reservoir until the level is between the "MIN" and "MAX" marks.
6. Replace the cap on the reservoir.
7. Test the brakes to make sure they are working properly.
Note: Be careful not to overfill the brake fluid reservoir. If the reservoir is overfilled, the brake fluid can expand and damage the brake system.
