1.Remove the wheel and tire.
2.Locate the brake caliper. It is usually located on the back side of the wheel hub.
3.Remove the two bolts that hold the brake caliper in place.
4.Gently pry the brake caliper off of the rotor.
5.Locate the brake piston. It is usually located inside the brake caliper.
6.Use a C-clamp to compress the brake piston. To do this, place the C-clamp on the outer edge of the brake piston and turn the screw until the piston is fully compressed.
7.Reinstall the brake caliper and the wheel and tire.
8.Test the brakes to make sure that they are working properly.
