* Cylinder head bolts: 25 Nm (18.4 ft-lb)
* Intake manifold bolts: 10 Nm (7.4 ft-lb)
* Exhaust manifold bolts: 20 Nm (14.8 ft-lb)
* Water pump bolts: 10 Nm (7.4 ft-lb)
* Oil pan bolts: 15 Nm (11.1 ft-lb)
It is important to follow these torque settings to ensure that the cylinder head is properly seated and sealed. Over-tightening the bolts can damage the cylinder head or the block, while under-tightening the bolts can cause the cylinder head to leak.
If you are not comfortable performing this work yourself, you should take your car to a qualified mechanic.
