1. Locate the oil dipstick. The oil dipstick is typically located on the driver's side of the engine, near the oil filter. It is a long, thin tube with a yellow or orange handle.
2. Remove the oil dipstick. Pull the oil dipstick straight out of the engine.
3. Wipe the oil dipstick clean. Use a clean cloth or paper towel to wipe the oil dipstick clean.
4. Reinsert the oil dipstick. Insert the oil dipstick back into the engine until it is seated.
5. Check the oil level. The oil level should be between the "full" and "add" marks on the oil dipstick.
6. If the oil level is low, add oil. Use a funnel to add oil to the engine. The oil fill cap is located on the top of the engine, near the valve cover.
7. Replace the oil fill cap. Tighten the oil fill cap securely.
8. Run the engine for a few minutes. This will circulate the new oil throughout the engine.
9. Check the oil level again. The oil level should be between the "full" and "add" marks on the oil dipstick.
Tips
* Always use the correct type of oil for your engine. The correct type of oil is specified in your owner's manual.
* Check the oil level regularly, especially before long trips.
* Adding too much oil can damage your engine.
Warnings
* Do not run the engine without oil. This can cause serious damage to the engine.
* If you notice any leaks, have them repaired immediately.
