Auto >> AutoSPT >  >> Engine

Why does the Honda City 2005 model give Jerk and off while accelerating car jerk till speed of 80kmh when you push more accelerator but if slowly it runs without jerk?

There are several possible reasons why your Honda City 2005 model may be jerking and cutting off while accelerating, especially when you push the accelerator hard but runs smoothly when you accelerate slowly. Here are some common causes and possible solutions:

1. Faulty Spark Plugs or Ignition System:

- Worn or damaged spark plugs or issues with the ignition system can cause misfires and jerking during acceleration.

- Check the condition of the spark plugs and replace them if necessary. Inspect the ignition wires, distributor (if applicable), and coil pack for any damage or corrosion.

2. Fuel System Issues:

- A clogged fuel filter or dirty injectors can restrict fuel flow and cause jerking.

- Replace the fuel filter if it's dirty or clogged. Have the fuel injectors cleaned or replaced if necessary.

3. Transmission Problems:

- Issues with the transmission, such as worn or slipping clutches or transmission fluid problems, can also lead to jerking.

- Check the transmission fluid level and condition. If the fluid is low or dirty, have it changed. If the issue persists, you may need to have the transmission inspected by a qualified mechanic.

4. Faulty Oxygen Sensor:

- A faulty oxygen sensor can provide incorrect feedback to the engine control unit (ECU), affecting the air-fuel mixture and causing jerking.

- Check the oxygen sensor and replace it if found to be faulty.

5. Vacuum Leak:

- A vacuum leak can disrupt the air-fuel mixture, causing rough running and jerking.

- Inspect the vacuum hoses and connections for leaks. Fix or replace any damaged or loose hoses.

6. Throttle Body Issues:

- A dirty throttle body can affect airflow and cause jerking.

- Clean the throttle body according to the manufacturer's recommendations.

7. Engine Mounts:

- Worn engine mounts can allow excessive engine movement, leading to a jerky feeling while accelerating.

- Inspect the engine mounts and replace them if they are damaged or broken.

8. Faulty Sensors:

- Issues with other sensors, such as the crankshaft position sensor, camshaft position sensor, or mass air flow (MAF) sensor, can also cause jerking.

- Have the vehicle's sensors diagnosed using a scan tool to identify any potential issues.

9. ECU Software Update:

- In some cases, a software update for the engine control unit (ECU) may be necessary to address specific issues related to jerking. Check with an authorized Honda service center to see if a software update is recommended for your vehicle.

If you're not comfortable performing these checks and repairs yourself, it's best to take your Honda City to a qualified mechanic for proper diagnosis and repair.