1. Turn off the engine and allow it to cool down completely.
2. Open the hood of your Neon.
3. Locate the fuse box. It is typically located in the engine compartment, near the battery.
4. Consult the owner's manual to identify the starter fuse. It is typically labeled as "Starter" or "ST".
5. Use a multimeter to test the fuse. Set the multimeter to the continuity setting.
6. Touch one probe of the multimeter to one terminal of the fuse and the other probe to the other terminal.
7. If the multimeter beeps or the display reads zero, the fuse is good.
8. If the multimeter does not beep or the display reads infinite, the fuse is blown and needs to be replaced.
9. To replace the fuse, simply pull it out of the fuse box and insert a new fuse of the same amperage.
10. Close the fuse box and the hood of your Neon.
Note: If the starter fuse blows repeatedly, there may be an underlying electrical problem that needs to be diagnosed and repaired.
