2. Remove the door panel. There are usually a few screws that hold the door panel in place. Once the screws are removed, you can carefully pry the panel off.
3. Locate the power window motor. The motor is usually located inside the door, near the window regulator.
4. Disconnect the electrical connections to the motor. There will be a few wires that connect the motor to the electrical system. Disconnect these wires by unplugging them or removing the screws that hold them in place.
5. Remove the bolts that hold the motor in place. There are usually a few bolts that hold the motor in place. Remove these bolts with a wrench.
6. Remove the motor. Once the bolts are removed, you can carefully remove the motor from the door.
Note: If the window is up, you may need to use a pry bar to pry the motor out of the door. Be careful not to damage the door or the motor while doing this.
