1. Gather the tools you need:
- Socket set
- Wrench set
- Screwdriver
- Spark plug wrench
2. Remove the engine cover:
- Open the hood of your Suzuki Verona.
- Locate the engine cover. It is usually a plastic cover that covers the top of the engine.
- Remove the bolts that hold the engine cover in place.
- Lift the engine cover off and set it aside.
3. Locate the ignition coils:
- The ignition coils are located on the top of the engine.
- They are cylindrical in shape and have spark plug wires connected to them.
4. Disconnect the spark plug wires:
- Use the spark plug wrench to disconnect the spark plug wires from the ignition coils.
- Be careful not to damage the spark plug wires.
5. Remove the bolts holding the ignition coils:
- Use the wrench to remove the bolts that hold the ignition coils in place.
- There are usually two bolts per ignition coil.
6. Lift the ignition coils off of the engine:
- Once the bolts are removed, you can lift the ignition coils off of the engine.
- Be careful not to drop the ignition coils.
7. Install the new ignition coils:
- Place the new ignition coils into the holes on the engine.
- Secure the ignition coils with the bolts you removed earlier.
8. Re-connect the spark plug wires:
- Re-connect the spark plug wires to the ignition coils.
- Make sure the spark plug wires are securely connected.
9. Replace the engine cover:
- Replace the engine cover and secure it with the bolts you removed earlier.
10. Close the hood of your Suzuki Verona.
That is how you change the ignition coil on a Suzuki Verona.
