1. Gather the necessary materials.
You will need:
- New oil (SAE 10W-40)
- Funnel
- Oil drain pan
- Wrench
2. Prepare the bike.
- Turn off the engine and let it cool down.
- Place the bike on a level surface.
- Remove the oil fill plug (usually located on the top of the engine).
3. Drain the old oil.
- Place the oil drain pan under the oil drain plug.
- Remove the oil drain plug.
- Allow all of the old oil to drain out.
- Replace the oil drain plug.
4. Add new oil.
- Use the funnel to add new oil to the engine.
- Add the amount of oil specified in the bike's owner's manual.
- Replace the oil fill plug.
5. Check the oil level.
- Start the engine and let it run for a few minutes.
- Turn off the engine and check the oil level.
- The oil level should be between the "full" and "add" marks on the dipstick.
