1. Park your car in a safe location and turn off the engine.
2. Open the trunk of your car.
3. Locate the tail light that you need to replace. It is located on the side of the trunk, near the rear of the car.
4. Remove the two bolts that hold the tail light in place. You will need a Phillips head screwdriver to do this.
5. Once the bolts are removed, you can pull the tail light out of the car. Be careful not to drop it.
6. Disconnect the electrical connector from the back of the tail light.
7. Install the new tail light by inserting it into the hole in the car and replacing the two bolts.
8. Reconnect the electrical connector to the back of the tail light.
9. Close the trunk of your car and turn on the engine.
10. Test the tail light to make sure it is working properly.
