Tools Required:
- Spark plug wrench
- 5/8-inch socket
- Ratchet
- Extension
- Pliers
- Dipstick tube
Instructions:
1. Remove the dipstick tube.
2. Disconnect the ignition coil connectors from the spark plugs.
3. Use a spark plug wrench to loosen the spark plugs.
4. Remove the spark plugs. Be careful not to drop them into the engine.
5. Use a 5/8-inch socket and ratchet to remove the old spark plugs.
6. Thread the new spark plugs into the engine by hand.
7. Use a spark plug wrench to tighten the spark plugs until they are snug.
8. Reconnect the ignition coil connectors to the spark plugs.
9. Replace the dipstick tube.
