1. Park your car on a level surface and turn off the engine. Allow the transmission to cool down.
2. Open the hood of your car.
3. Locate the transmission fluid dipstick. It usually has a yellow or red handle and is marked "ATF."
4. Pull the dipstick out and wipe it clean with a rag.
5. Reinsert the dipstick into the transmission fluid tube.
6. Pull the dipstick out again and check the fluid level. It should be between the "Full" and "Add" marks on the dipstick.
7. If the fluid level is low, add enough transmission fluid to bring it up to the "Full" mark on the dipstick.
8. Reinsert the dipstick into the tube.
9. Close the hood of your car.
NOTE: It is important to use the correct type of transmission fluid for your car. Refer to your owner's manual for the recommended fluid type.
