Parts needed:
* Fuel sending unit
* Fuel tank gasket
* Fuel filter
* Fuel line
Tools needed:
* Jack and jack stands
* Metric wrench set
* Screwdriver
* Pliers
* Funnel
* Safety glasses
Instructions:
1. Park your car on a level surface and turn off the engine.
2. Engage the parking brake.
3. Jack up the rear of the car and place jack stands beneath the frame.
4. Locate the fuel tank under the car.
5. Remove the bolts that hold the fuel tank in place and remove the tank from the car.
6. Remove the fuel sending unit from the fuel tank.
7. Inspect the fuel sending unit for damage and replace it if necessary.
8. Clean out the fuel tank.
9. Install the new fuel tank gasket.
10. Install the new fuel filter.
11. Reinstall the fuel tank in the car.
12. Tighten the bolts that hold the fuel tank in place.
13. Remove the jack stands and lower the car.
14. Fill the fuel tank with gas.
15. Start the engine and check the fuel gauge.
