Note: Before starting, make sure your car is parked on level ground and the engine is turned off.
1. Locate the power steering fluid reservoir. The reservoir is usually located in the engine compartment, near the steering column. It is often marked with a "PS" or "Power Steering" label.
2. Check the fluid level. The fluid level should be between the "MIN" and "MAX" marks on the reservoir. If the fluid level is low, you need to add more fluid.
3. Add power steering fluid. Use a funnel to add the fluid slowly. Do not overfill the reservoir.
4. Check the fluid level again. Make sure the fluid level is between the "MIN" and "MAX" marks.
5. Close the reservoir cap. Start the engine and turn the steering wheel from lock to lock a few times. This will help circulate the new fluid throughout the power steering system.
Remember, do not overfill the reservoir and keep the power steering fluid clean and free of contaminants. If you have any doubts or experience difficulties, it's best to consult your vehicle's user manual or seek assistance from a professional.
