- Replacement fan belt
- 17mm wrench
- 13mm wrench
- Flat-head screwdriver
Instructions:
1. Park your vehicle on a level surface and engage the parking brake. Turn off the engine and allow it to cool down completely.
2. Open the hood of your vehicle.
3. Locate the fan belt. It is located in the front of the engine, near the top.
4. Loosen the tensioner bolt using a 17mm wrench. The tensioner bolt is located on the side of the engine, near the alternator.
5. Use a flat-head screwdriver to pry the tensioner pulley away from the belt.
6. Remove the old fan belt from the engine.
7. Install the new fan belt by routing it around the pulleys in the correct order.
8. Tighten the tensioner bolt using a 13mm wrench.
9. Start the engine and check that the fan belt is running smoothly.
Tips:
- If the fan belt is cracked, frayed, or loose, it should be replaced as soon as possible.
- Be careful not to over-tighten the tensioner bolt, as this can damage the fan belt.
- If you are unsure about how to change the fan belt on your Renault Megane Scenic Diesel, please consult a qualified mechanic.
