1. Open the hood.
* Pull the lever located on the driver’s side footwell to release the hood.
* Go to the front of the vehicle and lift the hood.
2. Locate the headlight assembly.
* The headlight assembly is located at the front of the vehicle, behind the headlight lens.
3. Remove the headlight bulb cover.
* The headlight bulb cover is held in place by a few screws.
* Use a screwdriver to remove the screws and take off the cover.
4. Remove the old headlight bulb.
* The old headlight bulb is held in place by a metal clip.
* Press down on the metal clip and turn the bulb counterclockwise to remove it.
5. Install the new headlight bulb.
* Align the new headlight bulb with the socket and turn it clockwise until it locks into place.
* Make sure the metal clip is securely holding the bulb in place.
6. Replace the headlight bulb cover.
* Replace the headlight bulb cover and secure it with the screws that you removed earlier.
7. Close the hood.
* Go to the front of the vehicle and lower the hood.
* Make sure the hood is properly closed and latched.
Repeat this procedure to change the headlight bulb on the other side of the vehicle if needed.
