1. Remove the headrests: These need to come out first. There's usually a release button or lever on the headrests themselves.
2. Fold the seat bottom: The bottom cushion of the rear seat is typically hinged at the front. You might need to lift the cushion slightly to locate the release mechanism, which may involve a latch or a slight force. Once released, fold the bottom cushion forward. It usually folds flat against the front seats.
3. Fold the seatback: The seatback is usually hinged at the bottom and may have some catches or clips holding it upright. You might need to feel around the sides for release levers or manually unclip the seatback. Once released, fold it down flat.
Important Considerations:
* No standardized mechanism: There's no single, universally described mechanism. The exact method will depend on the specific trim level of your Grand Wagoneer and any potential modifications it might have had over the years.
* Manual effort: It requires some manual effort and manipulation. Don't force anything; if it feels stuck, carefully examine the area to find the release mechanism.
* Consult a manual: If you can't locate the mechanism, consult a 1985 Jeep Grand Wagoneer owner's manual. The manual should have diagrams illustrating the seat folding procedure. You can often find digital copies online (eBay, etc.).
* Inspect the area carefully: Look for levers, catches, or hinges that may be concealed or not immediately obvious.
If you're still having trouble, searching for "1985 Jeep Grand Wagoneer rear seat removal" on YouTube might show videos of others performing this task, which could be helpful. Remember to be gentle and avoid excessive force to prevent damage.
