The oil drain plug on a 1982 Honda Gold Wing is located on the bottom of the engine, on the left side. It is a 17mm bolt.
To drain the oil, you will need:
* A 17mm wrench
* A drain pan
* A funnel
* New oil (3.7 quarts)
* An oil filter wrench
Instructions:
1. Park your motorcycle on a level surface.
2. Turn off the engine and allow it to cool down.
3. Place the drain pan under the oil drain plug.
4. Use the 17mm wrench to loosen the oil drain plug.
5. Allow the oil to drain completely.
6. Replace the oil drain plug.
7. Remove the old oil filter.
8. Apply a thin coat of new oil to the gasket of the new oil filter.
9. Screw the new oil filter onto the engine.
10. Tighten the oil filter until it is snug.
11. Add new oil to the engine through the oil fill plug.
12. Check the oil level and add more oil if necessary.
13. Start the engine and let it run for a few minutes.
14. Check for leaks.
