1\. Open the hood.
2\. Remove the screws holding the splash shield in place:
- There are two screws on each side of the splash shield.
- Use a Phillips head screwdriver to remove them.
3\. Remove the push rivets:
- There are four push rivets securing the bumper cover to the fender on each side.
- Pull them out with pliers.
4\. Remove the bolts:
- There are two bolts on each side of the bumper cover
- Remove them with a wrench.
5\. Gently pry the bumper cover away from the car:
- Start at one side and work your way around.
- Be careful not to damage the paint.
6\. Disconnect the electrical connectors.
- There are two electrical connectors on the bumper cover.
- Disconnect them by pressing the release tabs and pulling them apart.
7\. Remove the bumper cover:
- Lift it off the car.
