Tools:
- Phillips-head screwdriver
- Flathead screwdriver
- Torx T30 screwdriver
- Socket wrench set
Parts
- Replacement indicator stalk
Instructions:
1. Disconnect the negative battery terminal to prevent accidental airbag deployment.
2. Remove the two Phillips-head screws at the top of the steering column cover.
3. Pry off the steering column cover using a flathead screwdriver.
4. Locate the indicator stalk assembly on the left side of the steering column.
5. Disconnect the electrical connectors from the back of the indicator stalk.
6. Use a Torx T30 screwdriver to remove the bolts holding the indicator stalk assembly in place.
7. Remove the indicator stalk assembly from the steering column.
8. Transfer the electrical connectors from the old indicator stalk to the new one.
9. Reinstall the indicator stalk assembly on the steering column, tightening the bolts securely with a Torx T30 screwdriver.
10. Reinstall the steering column cover and screws, pressing firmly until they snap into place.
11. Reconnect the negative battery terminal.
12. Test the new indicator stalk to ensure it is functioning properly.
