1. Prepare Tools
- Gather tools, such as a pry tool, screwdriver, and T-25 Torx driver.
2. Remove Plastic Cover
- Locate and remove the small plastic cover near the door handle. Behind it is a Torx screw.
3. Remove Torx Screws
- Use a T-25 Torx driver to remove all Torx screws on the door panel.
4. Remove Switch Housing
- Carefully pry off the switch housing that surrounds the window switches and door lock button. Disconnect any electrical connectors.
5. Remove Door Handle Bezel
- Remove the bolts holding the door handle bezel in place. Pull out the bezel, being careful not to damage any wiring.
6. Remove Door Lock Pull
- Pry off the door lock pull with a pry tool and remove its cover.
7. Release Panel Clips
- Insert a pry tool between the door panel and the door, working your way around to release all clips holding the panel in place.
8. Remove Panel
- Gently pull the door panel upward to remove it from the door. Unplug any electrical connectors attached to the panel.
9. Disconnect Cables and Rod
- Disconnect the window regulator cable, door handle cable, and any other cables or rods attached to the door panel.
10. Finish Removal
- Once everything is disconnected, the door panel should be completely detached.
Tips:
- Always start with the pry tool inserted closest to the door handle. Work your way around the panel to pop the clips.
- Take your time and be gentle. You don't want to damage the door panel or its connectors.
- If any electrical connectors resist, don't force them, as they may have locking clips that need to be released before they come apart.
