A Phillips head screwdriver
A flat head screwdriver
A Torx T25 driver
A door panel clip remover
1. Open the door and remove the two small Phillips head screws located in the door handle recess.
2. Use a flat head screwdriver to pry up the window crank knob cover and remove it.
3. Remove the two Torx T25 screws located behind the window crank knob cover.
4. Use a door panel clip remover to pry up the door panel clips around the perimeter of the door panel.
5. Once all of the clips are removed, carefully lift up the door panel and disconnect the window switch connector and the speaker connector.
6. Remove the door panel from the door.
