Open the hood of your vehicle to gain access to the headlight assemblies.
Locate the adjustment screws on the headlight assemblies. There will be two screws, one for vertical adjustment and one for horizontal adjustment.
Use a Phillips-head screwdriver to turn the adjustment screws. For horizontal alignment, turn the left-side adjustment screw clockwise to move the headlight beam right, or turn it counterclockwise to move the beam left. For vertical adjustment, turn the top adjustment screw clockwise to move the headlight beam up, or turn it counterclockwise to move the beam down.
Continue adjusting the headlights until they are aligned properly. The center of the headlight beam should be projected about 25 feet ahead of the vehicle at a height of 3.5 feet above the ground.
Close the hood of your vehicle when finished.
Here are some additional tips for adjusting headlights:
Park your vehicle on a level surface, facing a wall or garage door.
Make sure that the headlights are on and clean.
Use a tape measure or level to ensure that the headlights are aligned correctly.
If you have any questions about adjusting the headlights, you can consult your vehicle's owner's manual or a qualified mechanic.
