1. Disconnect the battery's negative terminal. This will prevent any electrical shocks while you are working.
2. Remove the two screws that hold the cluster bezel in place. These are located at the top of the bezel.
3. Use a pry tool or your fingers to carefully remove the bezel. Be careful not to break the clips that hold it in place.
4. Remove the four screws that hold the cluster to the dashboard. These are located around the perimeter of the cluster.
5. Disconnect the electrical connectors from the back of the cluster. There are two connectors, one for the speedometer and one for the tachometer.
6. Remove the cluster from the dashboard. Be careful not to drop it.
To reinstall the cluster, simply reverse the steps above. Be sure to reconnect the electrical connectors securely.
