1. Gather the necessary tools: Brake pads, caliper wrench, C-clamp, flathead screwdriver, clean rag, and safety glasses.
2. Park your bike on a level surface. Make sure the parking brake is engaged and the bike is in neutral.
3. Locate the brake calipers. They are located on either side of the front wheel and the rear wheel.
4. Remove the old brake pads. Use a flathead screwdriver to pry the old brake pads out of the calipers. Be careful not to scratch the rotors.
Step 2: Install New Brake Pads
1. Clean the brake calipers. Use a clean rag to wipe the brake calipers. This will help ensure the new brake pads are seated properly.
2. Install the new brake pads. Insert the new brake pads into the calipers. Make sure the pads are seated properly and are not rubbing on the rotors.
3. Reconnect the brake line. Reattach the brake line to the caliper and tighten it securely.
4. Check the brake fluid. Make sure the brake fluid is at the proper level and add more if necessary.
Step 3: Test the brakes.
1. Pump the brake lever. This will help to seat the new brake pads.
2. Take the bike for a test ride. Make sure the brakes are working properly before riding any further.
Additional Tips:
- If you are uncomfortable performing this repair yourself, you can take your bike to a qualified mechanic to have the brake pads replaced.
- Brake dust can be harmful if ingested, so avoid getting it in your eyes, nose, or mouth.
- Replace brake pads when the friction material is worn down to 1/8" or less.
- Always check your brake pads regularly to help prevent accidents and keep you safe on the road.
