The front wheel hubs have two grease fittings each. They are located on the outer side of the hub, near the top and bottom.
Rear Wheel Hubs
The rear wheel hubs have two grease fittings each. They are located on the outer side of the hub, near the top and bottom.
Front A-arms
The front A-arms have two grease fittings each. They are located on the top of the A-arm, near the pivot point.
Rear A-arms
The rear A-arms have two grease fittings each. They are located on the top of the A-arm, near the pivot point.
Steering Stem
The steering stem has one grease fitting. It is located on the bottom of the steering stem, near the tie rod ends.
Driveline
The driveline has two grease fittings. They are located on the driveshaft, near the front and rear differentials.
Swingarm
The swingarm has one grease fitting. It is located on the top of the swingarm, near the pivot point.
IMPORTANT: Make sure to use a high-quality grease that is compatible with your ATV. Polaris recommends using a grease that is rated for NLGI 2 or 3.
