Here's a likely procedure:
1. Locate the washer arm: It's the rotating part at the bottom of the washer tub that sprays water during the wash cycle.
2. Remove the pump or access panel: Often, the washer arm is held in place by a nut or clip accessible from underneath the washer. You'll likely need to remove the pump's access panel or, in some cases, the entire pump to reach this connection. Consult your washing machine's service manual (often available online) for the specific location and removal instructions for your model. This is usually found at the bottom front.
3. Disconnect the arm: Once you have access, look for a nut, retaining clip, or a screw holding the washer arm in place. Remove it carefully. The washer arm might also simply push or pull off.
4. Inspect the connection: Carefully examine the area where the arm connects to the motor coupling. There might be wear or damage that contributed to the failure. This is important for preventing future problems.
5. Install the new arm: Carefully align the new washer arm with the coupling and replace the nut, clip, or screw. Make sure it's securely fastened.
6. Reassemble: Put the pump access panel or pump back in place.
Important Considerations:
* Service Manual: Finding a service manual for your exact model number is crucial. The location and type of fasteners can vary significantly between models. Search online using your model number (e.g., "Whirlpool [your model number] service manual").
* Parts: Ensure you order the correct replacement washer arm for your specific model. Using an incorrect part can lead to further damage.
* Safety: Always unplug the washer before working on it. Water and electricity are a dangerous combination.
* Difficulty: This repair may require some mechanical aptitude and the use of basic hand tools. If you're uncomfortable performing this repair yourself, it's best to call a qualified appliance repair technician.
If you provide the full model number of your 2002 SSEI washer, I might be able to give more specific instructions.
