1. Make sure the engine is off and cool.
2. Open the hood of the car.
3. Locate the serpentine belt; it is the long, thin belt that wraps around the front of the engine.
4. Find the belt tensioner pulley. This is a small pulley located near the top of the engine, usually near the front or side.
5. Use a wrench to loosen the belt tensioner pulley. This will release the tension on the belt.
6. Once the tension is released, you can remove the serpentine belt by simply slipping it off the pulleys.
7. Inspect the belt for damage. If the belt is cracked, frayed, or has any other signs of damage, replace it with a new one.
8. To install a new belt, simply reverse the steps above.
Here are some additional tips for removing the serpentine belt on a 1995 Buick Park Avenue:
* You may need to use a pry bar or a screwdriver to help you remove the serpentine belt from the pulleys.
* Be careful not to drop the serpentine belt into the engine.
* If you are replacing the belt, make sure to get the correct size belt for your car.
* If you have any questions or concerns, consult a qualified mechanic.
