1. Remove the wiper blades. To do this, use a flat-head screwdriver to pry the wiper blades up from the windshield. Be careful not to damage the windshield.
2. Detach the bolts holding the motor to the firewall. These bolts may be rusted or corroded, so you may need to use penetrating oil to loosen them.
3. Remove the wiper motor from the vehicle. You may have to tilt or turn the motor to get it out from between the cowl vent assembly and firewall opening.
4. Inspect the wiper motor for damage. Look for any visible signs of wear or damage, such as cracks or breaks in the housing. If the motor is damaged, it will need to be replaced.
5. Test the wiper motor. To do this, connect the motor to a power source and see if it works. If the motor does not work, it will need to be replaced.
6. Reinstall the wiper motor. Insert the motor into the firewall opening and secure it with the bolts. Replace the wiper blades.
Here are some additional tips for repairing the wiper motor on a 1996 Mitsubishi Mirage:
- Disconnect the battery before starting any work.
- Be careful not to damage the windshield when removing the wiper blades.
- Use penetrating oil to loosen rusted or corroded bolts.
- Inspect the motor carefully for any visible damage.
- Test the motor before reinstalling it.
