Important: Always consult your vehicle's repair manual for specific instructions and safety precautions.
Parts Required:
- New Brake Rotors
- Brake Pads (if needed)
- Brake Caliper Repair Kit (if needed)
- Brake Fluid
- Jack and Jack Stands
- Lug Wrench
- Socket Set
- Torque Wrench
Step-by-Step:
1. Prepare the Vehicle:
- Engage the parking brake.
- Loosen the lug nuts on the wheels but don't remove them completely.
- Jack up the vehicle and place it on jack stands.
- Remove the lug nuts and take off the wheel.
2. Remove the Caliper:
- Locate the brake caliper. It is usually attached to the steering knuckle with two bolts.
- Remove the bolts and carefully remove the caliper.
- Hang the caliper with a piece of wire to prevent it from straining the brake line.
3. Remove the Old Rotor:
- The rotor should slide off easily. If it's stuck, tap it gently with a hammer to break it loose.
- Clean the hub surface where the rotor sits.
4. Install the New Rotor:
- Slide the new rotor onto the hub. Make sure it is seated correctly.
- Reinstall the caliper. Tighten the bolts to the specified torque.
5. Replace Brake Pads (if needed):
- If you're also replacing the brake pads, now is the time to do so.
- Slide out the old pads and insert the new ones.
- Make sure the pads are seated properly.
6. Reinstall the Wheel:
- Place the wheel back on the hub.
- Reinstall the lug nuts and tighten them by hand.
- Lower the vehicle.
7. Bleed the Brakes:
- This step is crucial to ensure proper brake performance.
- Refer to your vehicle's manual for the correct bleeding procedure.
8. Test the Brakes:
- Pump the brake pedal several times to build pressure.
- Take the vehicle for a test drive and test the brakes at low speeds.
- Make sure the brakes are working smoothly.
Note: If your vehicle has ABS (Anti-lock Braking System), there may be additional steps involved. Consult your repair manual for specific instructions on bleeding the ABS system.
Always prioritize safety when working on your vehicle's brakes. If you're uncomfortable with any part of this process, it's best to seek professional help or refer to your vehicle's repair manual for detailed instructions.
