* New brake pads
* C-clamp
* Phillips head screwdriver
* Flat head screwdriver
* Wheel chocks
* Jack and jack stands
* Lug wrench
* Caliper grease
* Brake fluid
* Safety glasses
Instructions
1. Park your truck on a level surface and set the parking brake.
2. Loosen the lug nuts on the front wheels.
3. Jack up the truck and place the jack stands under the frame.
4. Remove the lug nuts and take off the wheels.
5. Locate the brake caliper on the back of the wheel hub.
6. Remove the two bolts that hold the caliper in place.
7. Carefully remove the caliper from the rotor.
8. Inspect the brake pads for wear. If they are less than 1/4 inch thick, they need to be replaced.
9. If you don't need to replace the pads, simply put the caliper back on and reinstall the bolts.
10. If you do need to replace the pads, use a C-clamp to compress the caliper piston.
11. Remove the old brake pads.
12. Apply a small amount of caliper grease to the new pads.
13. Install the new brake pads in the caliper.
14. Put the caliper back on the rotor and reinstall the bolts.
15. Check the brake fluid level and add more if necessary.
16. Test the brakes by pumping the brake pedal several times.
17. Lower the truck and reinstall the wheels.
18. Tighten the lug nuts.
Tips
* Make sure that you have the correct brake pads for your truck.
* Be careful not to get any dirt or grease on the brake pads.
* If you have any questions, feel free to consult with a qualified mechanic.
Brake pads should be changed every 40,000 to 50,000 miles, or sooner if they are worn out. If you hear a squealing or grinding noise when you brake, it's a good idea to check your brake pads.
