Step 1: Insert Key
- Insert your key into the ignition and turn it to the "ON" position without starting the engine.
Step 2: Locate Reset Button
- Locate the "Trip Reset" or "Service Reset" button on the instrument panel. It is usually near the speedometer.
Step 3: Press and Hold
- Press and hold the "Trip Reset" or "Service Reset" button for a few seconds until you see the service light start to flash or blink.
Step 4: Keep Pressing
- Keep pressing the button until the service light turns off or until you hear a confirmation beep indicating the service light has been reset.
Step 5: Turn Key
- Turn the ignition key to the "OFF" position and then turn it back to the "ON" position to verify the service light has been reset.
Step 6: Drive
- Drive your Peugeot 807 for a short distance, and the service light should remain off if it was successfully reset.
*Note: If the service light does not go off after following these steps, you may need your vehicle serviced by a professional mechanic to clear any underlying faults or issues.*
