- First, turn the lawnmower off and disconnect the spark plug wire.
- Then, locate the battery located under the seat.
- Next, remove the battery from the mower by unscrewing the bolts that hold it in place.
- To recharge the battery, connect it to a battery charger. Make sure that the charger is set to the correct voltage and amperage. Charge the battery for the amount of time specified in the charger's instructions.
- Reconnect the battery after it is charged, reattached the spark plug wire and you can start the mower again.
Here are some tips on how to adjust the back wheel height on a Toro key-start recycler lawnmower:
- First, ensure the lawnmower is turned off and on a level surface.
- Locate the back wheel height adjustment knobs, usually located on the back of the mower.
- Turn the knobs to the desired height.
- The lawnmower blades should be approximately ¼ to ½ inch above the ground.
Here are some additional tips for maintaining a Toro key-start recycler lawnmower:
- Check the oil level regularly and add oil as needed.
- Clean the air filter regularly.
- Sharpen the blades if they become dull.
- Store the lawnmower in a dry place when not in use.
