1. Park the mower on a level surface, engage the parking brake, and turn off the engine. Allow the mower to cool down completely.
2. Locate the blade engagement cable. The cable is routed from the operator's seat to the mower deck. It is usually attached to a lever or knob on the mower deck.
3. Inspect the cable for damage. Look for fraying, kinking, or other damage to the cable. If the cable is damaged, it will need to be replaced.
4. If the cable is not damaged, check the connection at the mower deck. Make sure that the cable is securely attached to the lever or knob. If the connection is loose, tighten it.
5. Check the connection at the operator's seat. Make sure that the cable is securely attached to the lever or knob. If the connection is loose, tighten it.
6. Test the blade engagement cable. Start the mower and engage the blade engagement lever or knob. The blades should engage and start rotating. If the blades do not engage, repeat steps 3-5.
If you are unable to fix the blade engagement cable, take the mower to a qualified repair technician.
