1. Safety First: Before you begin any work, make sure your Harley-Davidson Road King is in a safe and stable position. If you are uncomfortable performing any of these steps, it's best to consult a professional motorcycle mechanic.
2. Tools Needed: Gather the necessary tools, which may include a set of wrenches, a socket set, and a Phillips head screwdriver.
3. Disconnect the Turn Signals: If your front fender has integrated turn signals, disconnect the electrical connectors for the turn signals.
4. Remove Fender Mounts: Locate the bolts or screws that secure the front fender to the motorcycle. These are typically located on the bottom of the fender and may be covered with rubber grommets. Remove these fasteners and any associated washers or spacers.
5. Remove Brace Support: There might be a brace support behind the headlight that secures the front fender. If this is the case, remove it by unbolting it from the frame.
6. Pull the Fender Off: Once all of the fasteners have been removed, carefully pull the front fender straight up and off of the motorcycle.
7. Clean and Inspect: While the front fender is off, take the opportunity to clean and inspect both the fender and the mounting area. Look for any signs of damage, rust, or wear-and-tear.
8. Reassembly: When ready, reverse the steps to reinstall the front fender. Make sure all of the fasteners are tightened securely and the turn signals (if applicable) are properly connected.
Remember, if you are unsure or uncomfortable performing any of these steps, it's best to consult with a professional motorcycle mechanic. They can ensure the fender is removed and reinstalled safely and correctly.
