Is slight metal shavings normal in the eng oil removed from a 2006 Harley touring module with 5000 miles?

Slight metal shavings in engine oil are not uncommon, especially in a newly broken-in engine. As the engine components wear in, small amounts of metal can be shed and end up in the oil. However, if the amount of metal shavings is excessive or if the shavings appear to be large and chunky, it may be a sign of a more serious problem and should be investigated by a qualified mechanic.

Here are a few possible reasons why you might find metal shavings in your engine oil:

* Normal engine wear: As mentioned above, slight metal shavings are a normal byproduct of engine wear. This is especially true during the first few thousand miles of operation, when the engine components are still bedding in.

* Engine damage: Excessive or chunky metal shavings can be a sign of more serious engine damage, such as a worn bearing or a damaged piston. If you find large amounts of metal shavings in your oil, it is important to have your engine inspected by a qualified mechanic.

* Oil contamination: Metal shavings can also get into your engine oil if the oil is contaminated with debris from the outside environment. This can happen if the oil filter is not properly seated, or if the oil filler cap is left open.

If you are concerned about the amount of metal shavings in your engine oil, it is always best to err on the side of caution and have your engine inspected by a qualified mechanic.