1. Park the car in a safe location. Apply the parking brake and turn off the engine.
2. Open the trunk.
3. Locate the taillight assembly. It is located on the side of the trunk, near the rear of the car.
4. Remove the two screws that hold the taillight assembly in place. Use a Phillips head screwdriver to loosen the screws.
5. Pull the taillight assembly out of the trunk. Be careful not to drop it.
6. Locate the burnt-out bulb. The bulb is located inside the taillight assembly. It is usually held in place by a metal clip.
7. Remove the burnt-out bulb. Press down on the metal clip and pull the bulb out of the socket.
8. Insert the new bulb. Push the new bulb into the socket until it is secure.
9. Replace the metal clip. Press down on the metal clip until it snaps into place.
10. Reinstall the taillight assembly. Slide the taillight assembly back into the trunk and secure it with the two screws.
11. Close the trunk.
Your rear light bulb is now changed.
