Auto >> AutoSPT >  >> Auto Repair

How do you replace the alternator on a 2000 VW Jetta VR6?

Tools

* Ratchet

* Socket set

* 10mm wrench

* 13mm wrench

* 15mm wrench

* 17mm wrench

* Flat-head screwdriver

* Pliers

* Vise grips

Instructions

1. Disconnect the battery. This will prevent any sparks from occurring while you are working on the alternator.

2. Remove the air intake hose. This will give you access to the alternator.

3. Remove the serpentine belt. This is done by loosening the tensioner pulley and then slipping the belt off of the pulleys.

4. Disconnect the electrical connector from the alternator. This is done by pressing down on the release tab and then pulling the connector apart.

5. Remove the upper and lower alternator mounting brackets. These are located on the front of the engine.

6. Remove the alternator from the vehicle. This is done by lifting the alternator up and out of the engine bay.

7. Install the new alternator in reverse order of removal. Be sure to tighten all of the bolts and screws properly.

8. Reconnect the battery and start the vehicle. Check for any leaks or unusual noises.

Auto Repair
What does a custom car mechanic do? How can you reset the check tire pressure warning on a 98 park ave?
Car Care
Keep Moisture Out of Your Classic Garage Timing Belt Symptoms: What You Need to Know  First There’s a Shortage of New Cars, Now There’s a Shortage of Car Parts
Engine
How do you replace the rear main seal on a 1968 390 engine? How fast does the lamborghini lp670-4 sv go?
Electric Car
What does it mean when a car while driving slows down on its own and stalls out? How much does it cost to replace the transmission on a 2002 Ford Expedition? Electric NIO ET5 Price, Performance & Delivery Date?
Autopilot
Where was the first motorbike built? Set cam timing on gs 450 suzuki?
Car Photos
How do you locate the starter in a 1990 Toyota Camry? Why are car headlights made from glass and not transparent plastic? What was the first front wheel drive car?