Preparation:
- Make sure the lights on the car are switched off and the car is parked on level ground.
- Put on safety glasses and prepare the necessary tools, such as a flat-head screwdriver, Phillips-head screwdriver, and a pry tool.
Removing the Old Brake Light:
- Open the trunk of your car.
- Locate the third brake light assembly on the inside of the trunk lid.
- Use a flat-head screwdriver or pry tool to gently pry the plastic housing of the brake light away from the trunk lid.
- Disconnect the electrical connector from the brake light.
Installing the New Brake Light:
- Connect the electrical connector to the new brake light.
- Place the new brake light into the housing on the trunk lid and gently press until it snaps into place.
- Test the brake light by pressing the brake pedal and checking that the light comes on.
Additional considerations:
- Be mindful not to damage the paint on the trunk lid while prying the housing off.
- Some models may require you to remove the trunk liner to access the third brake light assembly.
- If the new brake light doesn't work properly, check for proper connections or refer to the vehicle's manual.
Remember that if you are not comfortable performing this task, it's recommended to consult a professional mechanic.
