Auto >> AutoSPT >  >> Auto Repair

Is it necessary to remove the caliper replace brake pads on a 2001 Cabrio?

It is not necessary to remove the caliper to replace the brake pads on a 2001 Cabrio. There are two slide pins that hold the caliper in place, and if you remove these pins, you can slide the caliper out of the way without removing it completely from the vehicle. This will give you enough access to replace the brake pads.

Here are the step to replace the brake pads:

1. Jack up the vehicle and remove the wheel and tire.

2. Remove the brake caliper sliding bolt cover caps.

3. Remove the brake caliper sliding bolts.

4. Pull the brake caliper and disc off.

5. Remove the old brake pads from the caliper.

6. Clean the caliper and brake disc.

7. Apply a thin coat of brake grease to the caliper piston and the back of the new brake pads.

8. Install the new brake pads in the caliper.

9. Reinstall the brake caliper, disc and tire.

It's important to keep in mind that changing brake pads can be dangerous if not done correctly, and it's always a good idea to follow all safety instructions and to consult a professional if you have any doubts about the process.