Preparations:
1. Safety First: Securely chock the wheels to prevent the vehicle from rolling and disconnect the battery to avoid electrical hazards.
2. Raise and Support: Lift the front of the vehicle with a jack and place it on jack stands to gain access underneath the engine. Ensure that the vehicle is firmly supported.
Procedure:
1. Locate Motor Mounts: Identify the motor mounts that need replacement. They are usually located on either side of the engine, connecting it to the vehicle's chassis.
2. Unbolt Old Mounts: Use a wrench or socket set to loosen and remove the bolts or nuts that secure the motor mount to the engine and the vehicle's frame.
3. Remove Old Mounts: Once the bolts are removed, you can gently pry the old mounts away from the engine and the frame. Be careful not to damage any other components nearby.
4. Install New Mounts: Position the new motor mounts in place, aligning them with the corresponding holes on the engine and the frame.
5. Secure New Mounts: Thread the bolts or nuts back into the mounting holes and tighten them securely to hold the motor mounts in place.
6. Double-Check: Make sure that the motor mounts are properly seated and that all the bolts or nuts are tightened securely before lowering the vehicle.
Completion:
1. Lower Vehicle: Carefully lower the vehicle from the jack stands and remove the wheel chocks.
2. Reconnect Battery: Reconnect the battery cables to restore electrical power to the vehicle.
3. Test Drive: Take the vehicle for a test drive to ensure that the engine is operating smoothly and there are no unusual vibrations or noises.
Remember that attempting DIY repairs, including replacing motor mounts, can be complex and potentially dangerous if you are not mechanically inclined or lack proper tools. If you are not confident in performing this task, it's best to seek assistance from a qualified mechanic or refer to a detailed repair manual specific to your Oldsmobile Intrigue model.
