1. Locate the seat back adjustment lever: it is usually located on the side of the seat, near the bottom.
2. Pull up on the lever: This will release the seat back from its current position.
3. Move the seat back to the desired position: Use the lever to move the seat back until it is in the position you want.
4. Release the lever: Once the seat back is in the desired position, release the lever. The seat back should lock into place.
If the seat back adjustment lever is not working properly, you may need to replace it. To do this, follow these steps:
1. Remove the old seat back adjustment lever: Use a screwdriver or wrench to remove the screws that hold the lever in place.
2. Disconnect the cable: Disconnect the cable that is attached to the lever.
3. Install the new seat back adjustment lever: Insert the new lever into the hole in the seat and secure it with the screws.
4. Reconnect the cable: Reconnect the cable to the new lever.
5. Test the adjustment lever: Pull up on the lever to make sure that it is working properly.
