1. Replacement parking light bulb (automotive store will ensure the correct fit for your vehicle)
2. Phillips-head screwdriver
Instructions:
Step 1: Access the Parking Light Assembly
1. Open the hood of your Chevy Blazer and locate the parking light assembly on the front of the vehicle. It is usually located near the headlight housing.
Step 2: Remove the Old Bulb
1. Use the Phillips-head screwdriver to loosen the screw holding the parking light assembly in place.
2. Once the screw is loosened, gently pry open the assembly to expose the old bulb.
3. Gently twist and pull the old bulb out of its socket.
Step 3: Insert the New Bulb
1. Take the new bulb and insert it into the empty socket.
2. Gently push and turn the bulb until it is secure in place.
Step 4: Reattach the Parking Light Assembly
1. Snap the parking light assembly back into place.
2. Tighten the screw using the Phillips-head screwdriver.
Step 5: Test the New Bulb
1. Turn on the parking lights to ensure the new bulb is working properly.
Step 6: Repeat for the Other Side
1. If needed, repeat the process on the other side of the vehicle to replace the other parking light bulb.
