* A soldering iron and solder
* A desoldering pump or wick
* A multimeter
* A replacement LCD display (available online)
* A small Phillips head screwdriver
* A flathead screwdriver
* Isopropyl alcohol
* Cotton swabs
1. Remove the dash cluster from the car. To do this, you will need to remove the steering wheel, the center console, and the instrument panel.
2. Disassemble the dash cluster. Once the dash cluster is removed from the car, you will need to disassemble it to access the LCD display. To do this, remove the screws that hold the cluster together and carefully separate the pieces.
3. Remove the old LCD display. Once the dash cluster is disassembled, you will need to remove the old LCD display. To do this, use the soldering iron and desoldering pump or wick to remove the solder that holds the display in place. Be careful not to damage the circuit board.
4. Install the new LCD display. Once the old LCD display is removed, you can install the new display. To do this, align the new display with the circuit board and solder it in place.
5. Reassemble the dash cluster. Once the new LCD display is installed, you can reassemble the dash cluster. Be careful not to damage any of the components when reassembling the cluster.
6. Test the dash cluster. Once the dash cluster is reassembled, you can test it to make sure that it is working properly. To do this, connect the cluster to the car's electrical system and turn the key to the "On" position. The LCD display should light up and display the correct information.
7. Reinstall the dash to the car. Once you test the dash cluster and everything is in working order, reinstall the cluster into the car.
