NOTE: The instructions are the same for both the driver and passenger side headlight covers.
1. Open the hood of your Grand Am.
2. Locate the two bolts holding the headlight covers in place. They are located on the top and bottom of the covers.
3. Use a 10mm wrench to loosen the bolts and remove them.
4. Once the bolts are removed, you can gently pry the headlight covers off.
5. Be careful not to damage the paint on your car when prying off the covers.
6. Once the covers are removed, you can replace them with new ones if desired.
7. To install the new covers, simply reverse the steps above.
