Auto >> AutoSPT > >> Auto Repair

How do you remove a lug nut cap from dodge truck?

To remove a lug nut cap from a Dodge truck, you will need the following tools:

- A lug wrench

- A flat-head screwdriver

- A hammer

1. Park your truck on a level surface and engage the parking brake.

2. Locate the lug nut caps on your truck's wheels. They are usually made of plastic and are located in the center of each wheel.

3. Use the flat-head screwdriver to pry the lug nut cap off of the lug nut. Be careful not to damage the paint on your wheels.

4. Use the lug wrench to loosen the lug nuts on your truck's wheels.

5. Once the lug nuts are loosened, remove the lug nut caps by hand.

6. Retighten the lug nuts and replace the lug nut caps.

Note: If the lug nut caps are difficult to remove, you may need to use a hammer to knock them off. Be careful not to damage the lug nuts or the wheels when using a hammer.

How do you replace the 2003 Ford Focus air filter when screws to airbox just spin instead of come off? How do you replace the rear window wiper on a 1993 Mercury Sable wagon?