- A screwdriver.
- A ratchet set.
- A pry bar.
Step 1: Open the trunk of your Fiat Panda.
Step 2: Locate the two plastic screws on either side of the trunk opening. Remove these screws using a screwdriver.
Step 3: Locate the four bolts on the underside of the rear bumper. Remove these bolts using a ratchet set.
Step 4: Gently pry the rear bumper away from the body of the car using a pry bar. Start from one side and work your way around the bumper until it is completely detached.
Step 5: Lift the rear bumper off of the car and set it aside.
To reinstall the rear bumper, simply follow the steps in reverse order.
Here are some additional tips:
- Be careful not to damage the paint on the body of the car when prying the rear bumper away.
- Make sure that all of the screws and bolts are securely tightened before driving the car.
- If you are uncomfortable removing the rear bumper yourself, you can have it done by a qualified mechanic.
