- Lug wrench
- Jack
- Jack stands
- Breaker bar
- Socket set
- Caliper bolts
- Brake rotors
Instructions:
1.) Engage your vehicle’s parking brake and loosen all four lug nuts on the wheel you’re starting on.
2.) Raise the vehicle with a jack and place a jack stand underneath it for safety.
3.) Use the lug wrench to remove all lug nuts and take off the wheel.
4.) Use a breaker bar and the correct size socket to remove the two bolts that hold the brake caliper in place.
5.) Remove the brake caliper and hang it from the suspension system with a length of wire or string to prevent damage to the brake line.
6.) Remove the old brake rotor from the wheel hub.
7.) Place the new brake rotor onto the wheel hub and tighten it in place with the lug nuts.
8.) Reattach the brake caliper and tighten the bolts.
9.) Replace the wheel and lower the vehicle.
10.) Repeat steps 2-8 for the other three wheels.
